|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2012
Posts: 488
|
Oil Pressure Relief Valve?
Is this the second Oil Pressure Relief Valve?
Looks like its leaking a bit, so looking to tighten it up, but wanted to know what it was first. Looks to me like it is the oil pressure relief valve, but in the Bentley manual, it appears to have a hex nut, not a slot. Can someone please confirm? Thanks! 
__________________
J 911 SC - 1980 911 S - 1977 |
||
09-21-2013, 03:49 PM
|
|
|
Registered
|
Some are hex...some are slot.
Yes it's the pressure relief cap. There should be a copper or aluminum washer. Bob
__________________
Bob Hutson |
||
|
09-21-2013, 03:55 PM
|
|
|
Registered
Join Date: Aug 2012
Posts: 488
|
Any idea on the torque spec's? I didn't see it...
__________________
J 911 SC - 1980 911 S - 1977 |
||
|
09-21-2013, 03:58 PM
|
|
|
Registered
Join Date: Mar 2010
Posts: 799
|
The pressure relief cap needs a new crush washer (aluminum... Same as the oil tank drain washer I believe). Torque to 60NM.
__________________
1973 Coupe Projekt X (AKA bunch o' boxes full of parts) |
||
|
09-21-2013, 04:48 PM
|
|
|
Moderator
Join Date: Dec 2001
Posts: 9,569
|
__________________
'66 911 #304065 Irischgruen ‘96 993 Carrera 2 Polarsilber '81 R65 Ex-'71 911 PCA C-Stock Club Racer #806 (Sold 5/15/13) Ex-'88 Carrera (Sold 3/29/02) Ex-'91 Carrera 2 Cabriolet (Sold 8/20/04) Ex-'89 944 Turbo S (Sold 8/21/20) |
||
|
09-21-2013, 05:28 PM
|
|
|
Registered
Join Date: Aug 2012
Posts: 488
|
Thanks! Super helpful. That's Fantastic!
__________________
J 911 SC - 1980 911 S - 1977 |
||
|
09-22-2013, 07:07 AM
|
|
|
Harley
