who makes 3 pc wheels using fuchs centers
 

besides HRE, who makes wide, 3 piece 15" wheels (15x14 rear, and 15x9 front) using centers machined out of fuchs wheels. i have a customer building an RSR style replica who needs some. TIA

Lindsey Racing

http://www.lindseyracing.com/

Hi,

Here is a picture of my 15" 3 piece wheels with fuch centers.They are 9" front and 11" rear, with proper offsets for use on a 930 without using wheel spacers.

I think they are made using 16" flat face fuch wheels and cutting out the centers. and then use BBS wheel half's

Take care

- Joe -

Yep, Lindsey Racing, they do excellent work.

thanks, i'll turn him on to lindsey.

He might also want to look at their two piece wheels, which have the added benefit of lacking the row of non-period looking bolts around the perimeter. I have two sets from Lindsey (one street, one track). No durability issues yet, after more than a dozen hard days on different West Coast tracks.

http://forums.pelicanparts.com/uploa...uarter01-m.jpg

http://forums.pelicanparts.com/uploads/00NewFuchs01.jpg

One more thing. The two-piece wheels are <u>cheap</u> compared to the three-piece ones. I paid $1300 for each set, plus a $400 set of donor 6x16 Fuchs.

Three-piece wheels are typically $2400 to $2900.

CMW also makes them. Their cost is in between HRE and Lindsey. There's also another outfit who's name I can't remember, but they advertise in the back of Grassroots Motorsports.

I was about to mention CMW but Nader already did.

This car has 17 inch Fuchs look wheels using Compomotive centers and BBS rims. http://forums.pelicanparts.com/uploads/74RSRtest1.jpg No idea where he got them though.