adding carrera/c2 flares on pre 78 911's
 

I have a 74 911s and I am updating to c2 narrow body, I have heard of 3m glue to add
on the flares with, but has anyone done this?
Is there a link to a web site that shows the
procedure in great detail, HELP PLEASE!!!
CodyJ.

I'm adding flares to my car and talked to my body guy about the 3m glue. He's been adding flares to Porsches for years and is very skeptical of the glue. I'm going for the welding. At leas with welding there's no chance of the weld breaking down and separating!

------------------
-Richard
'84 Carrera Cabriolet
'74 911 Widebody 3.6 Project

you must be joking.

Very few flares are getting welded on these days. Most are using the 3M stuff, or Zotz fasteners. I have had 3 cars updated to turbo look with the 3M stuff. I have seen many welded ones crack or split, never a bonded one. When I first put them on, I was a little skeptical also, but after raising the car by way of a jack and block of wood under the lip of the flare,(before paint). I'm convinced. This car had it done about 6 years ago, and after many drivers eds, auto x, and club races, not the slightest "ripple".
Just my .02 !
Marc
http://www.pelicanparts.com/ultimate...s/911small.jpg