Boxed suspension arms for racing purposes

[donporfi]

Sorry to post in this forum, but in the 356 Forum I did not get any answers.
I hope somebody here can help.

Can you recommend a shop that can box (make them stiffer) the suspension arms of a 356C in order to avoid deflection.
The car is going to be used in the Carrera Panamericana and will be highly modified. A stronger suspension is going to be needed.

What they do is weld reinforcing to the arms. What I do not know is if after welding they do a heat treatment like tempering or something.
I read this was usually done to racing 356s.

This is what is needed:

[Black_Hat]

see off road racing VW guys

they widen front ends and lengthen both front and rear arms for more travel, They can strengthen as well .

they last 1000mi in Baja

[Bob Clucas]

contact Vic Skirmants @
Welcome | 365 Enterprises