Need help

[Antomero]

Can’t find for the life of me two screws on the side of the 3.2 Carrera distributor that hold the anchors for the distributor cap. It’s a small I believe M3x6 flat head screw.
Anyone have a part number on these screws.

Cheers!

[Quickstep192]

Maybe a few more than you'll need, but....


https://www.globalindustrial.com/p/fasteners/Machine1-Screws/cheese-head-machine-screws/cgc03006-machine-screw?infoParam.campaignId=T9F&gclid=EAIaIQobChMIi-qkl-OD7gIVxp2GCh2-rgyrEAYYASABEgJNlvD_BwE

[kimlangley7]

Try Bel-Metric >>

https://www.belmetric.com/slotted-cheese-machine-c-10_1755/

[Antomero]

Thanks guys!!!