|
|
|
|
|
|
Registered
Join Date: Sep 2002
Posts: 513
|
MFI pump specs
Does anyone know the fuel delivery amounts for eary 911 MFI pumps. Looking to compare 2.4 E&S and 2.7RS specs.
Thanks ED
|
||
|
|
|
|
Registered
|
The same Bosch electric pump was used for all MFI engines, '69 thru '76. The fuel delivery rate was 125 liters per hour, and 900 - 1000 cc output in 30 seconds.
Bosch 0.580.970.001 Porsche 901.608.105.00
__________________
Warren Hall, Jr. 1973 911S Targa ... 'Annie' 1968 340S Barracuda ... 'Rolling Thunder' |
||
|
|
|
|
Crusty Conservative
|
Ed,
Are you perhaps asking about the MFI INJECTION PUMP specs????
__________________
Bill 69 911 T Targa, 2.4E w/carbs (1985-2001) 70 911 S Coupe, 2nd owner (1989- 2015) 73 911 T Targa, 3.2 Motronic (2001- ) |
||
|
|
|
|
Registered
Join Date: Sep 2002
Posts: 513
|
I should have specifed....
The injection pump is what I am looking for the specs. Trying to see if they are that much different. ED |
||
|
|
|
|
Crusty Conservative
|
Oh, they're different all right.. Warren may have the specs, or another of our gurus.. Gus Pfister at Pacific FI is the real expert here, I believe...
I don't know personally, but I know an E runs crappy with a T pump...don't ask. BTW, does anyone know if Gus is training an apprentice to carry on the tradition when he finally decides to retire??/
__________________
Bill 69 911 T Targa, 2.4E w/carbs (1985-2001) 70 911 S Coupe, 2nd owner (1989- 2015) 73 911 T Targa, 3.2 Motronic (2001- ) |
||
|
|
|
|
Registered
|
ED,
There are different output curves plotted in terms of output volume in cc's per injection stroke vs rpm in the factory service manual, and perhaps in some of the Pelican reference documents.
__________________
Warren Hall, Jr. 1973 911S Targa ... 'Annie' 1968 340S Barracuda ... 'Rolling Thunder' |
||
|
|
|
|