First Dyno for 3.2L
 

After owning my 1984 3.2L Carrera for 10 years, I finally put it on a Dyno today.

The Dyno was a DynoJet corrected for the environment.

My max run was 206HP at the wheels. Corrected for 12% drivetrain loss that means the HP at the flywheel was in the neighborhood of 230BHP. Not bad!

Over the last 10 years here are the mods I think contributed the most to the results.

• Replaced the stock muffler with a Magnaflow 1 in 2 out.
• Replaced the cat with a euro cat bypass
• Removed injectors and had the them cleaned and profiled.
• Adjusted the arm on the AFM
• Drilled holes in the air box cover
• Upgraded the ECU with an 8K 1989 chip

http://forums.pelicanparts.com/uploa...1427577539.jpg


Here is a link to a video of the last part of the last run.

https://youtu.be/uSED-42u5_8

That looks about right.

Congrats, Nice Numbers :-)

Very similar to the results on my 1988 Targa:
Fabspeed cat bypass
Steve Wong chip
Monty 2 in 1 out muffler

206 RWHP on a corrected DynoJet at Carburator Connection in Kirkland WA