|
|
|
|
| Author |
|
|
Guest
Posts: n/a
|
Hi evereybody , I am installing new front fuel pump on my 1989 930 turbo and just want make sure that wire connection is at the right place red on + side and brown on negative side , is it right thank you in advance
__________________ This post was auto-generated based upon a question asked on our tech article page here: |
||
03-31-2015, 10:38 AM
|
|
|
Moderator
Join Date: Jan 2015
Posts: 127
|
That is typically the proper connection, however I would just verify with a volt meter: when the red lead of the meter is connected to the red wire from the car and the black lead from the meter is connected to the B- terminal, crank the engine. The volt meter should display battery voltage. That proves that the red wire is the positive connection to the pump.
- Casey |
||
|
03-31-2015, 10:38 AM
|
|
