Direct Connect Oil Hoses for Front Coolers

BoxsterGT · 04:34 AM

I have been putting together custom Metric Fuel & Oil Hoses for Porsches for quite a few years, and every once in a while I get a request for hoses to fit AN-12 Oil Coolers. Enough requests for me to finally do something about it.

So, for those of you who want to fit a less costly -12AN Oil Cooler up front and cringe at the cost of Metric to AN adapters & AN fittings & hose, I now have the solution.

Here are my Direct Connect Oil Cooler hoses..........

They are M30 Female at the Fenderwell end and AN-12 Female at the cooler end. One-piece, crimped, with no adapter issues, no expensive AN fittings or hose to wrestle with. A complete hose assembly made to your specific configuration as the factory would have done it. In fact, this hose is from Cohline in Germany, the same supplier to Porsche since the 911 was first introduced to the public.

The last photo shows a front mounted Setrab cooler that is run in series with the original Carrera fender cooler. Almost any length or config can be made up. Please email me for info.

Len at Autosportengineering dot com