| rick-l |
02-11-2016 07:35 PM |
Quote:
Originally Posted by scarceller
(Post 8994079)
Since the thread is about a possible aftermarket coil that may/could work properly, how about this one?
HVC-2 Coil, 6 Series Ignitions - 8253
It's a 'HVC-2 Coil, 6 Series Ignitions' from MSD, looks very different but here's the specs:
Turns ratio: 100:1
Primary resistance: .16 OHMs
Secondary resistance: 630 OHMs
Inductance: 3.5 mH
Maximum voltage: 44,000 Volts
Peak current: 450 mA
Spark duration: 450 uS
Weight: 3.75 lbs
Not cheap, runs about $200!
thoughts?
|
I'd say no. The 0.16 ohms lets it charge really fast and because the coil resistance is low it makes the driver dissipate about 100 Watts when in hold mode. I don't know the specs for the proprietary Darlington in the DME but I doubt instantaneous Ptot is 100 Watts. You could change the dwell table.:)
Quote:
Originally Posted by dicklague
(Post 8994440)
|
That is part of a "Complete capacitive discharge ignition system for 4-6-8 cylinder race engines" part of Daytona Sensors CD-1 Ignition System. They don't give any data for it and I bet it is tailored for their CDI sytem
|
