Help with headers
 

I am being offered a set of B&B headers for my C2 964 and went to see them today, I found that they are actually SC/Carrera headers because the heater connections were the small round ones and not the oval ones per the 964. The question is can they still be made to work and is the header tubing diameter smaller on the B&B SC/Carrera headers than the B&B 3.6 headers?
Thanks in advance.

Call B&B and they will give you the answer

Here a pic of 1.75"OD B&B headers custom made for my 964 transplant. With the oval 964 heat inlet/SC heat outlet. They were also available in 1.625"OD. You'll have to measure them to tell the difference.
http://www.cheaterswayside.com/uploa...b2small100.JPG
Anything can be made to work the issue is how much extra time/effort/$ are required.

------------------
<font color="#730000">Bill Verburg</font>
My Home Page http://www.pelicanparts.com/ultimate/icons/icon15.gif My Pelican Gallery page http://www.pelicanparts.com/ultimate/icons/icon15.gif My Porsche Owners Gallery Page


[This message has been edited by Bill Verburg (edited 10-10-2001).]