torque spec for oil breather?

[doublebuffle]

Thanks, thinking its that same as the valve covers but cant find it in bentley.

[steely]

I have it pretty low in my notes at 6 ft-lbs, but maybe get it confirmed.

[doublebuffle]

Yea that's why I ask, 72 in-lbs seems like a lot...

[steely]

ha - found it in Bentley 102-24 - I hope this is what you were looking for.

[JJ 911SC]

Originally Posted by steely

ha - found it in Bentley 102-24 - I hope this is what you were looking for.

or your original thought: 72 in-lbs

[Flat6pac]

Tight, but not too tight...
Bruce

[doublebuffle]

Yup, broke a stud on my brand new fuel tank going to 18 in-lbs.... argh

[JJ 911SC]

Originally Posted by doublebuffle

Yup, broke a stud on my brand new fuel tank going to 18 in-lbs.... argh

Strange, that is 1.5 ft-lb (2 Nm).

You were not on the ft-lb range by chance, BTDT.

[doublebuffle]

I have a 1/4 in drive torque wrench for in lbs and a 1/2 in forlft lbs so no.

[JJ 911SC]

Originally Posted by doublebuffle

I have a 1/4 in drive torque wrench for in lbs and a 1/2 in forlft lbs so no.

What is the stud size?