![]() |
|
|
|
Registered User
Join Date: Apr 2016
Posts: 15
|
Oil in wur
Hi.
I had a small cable fire in my 911 SC from 1980, in the wires to the wur. When I opened the wur it had a lot of oil in it. The wur itself looked good and clean, but from what I have heard it shouldn't be any oil in it. Is this correct? And in that case how did the oil get there? Last edited by wenta; 05-10-2016 at 09:56 PM.. |
||
![]() |
|
Registered
Join Date: Mar 2004
Location: Belgium
Posts: 980
|
What WUR type? a 045 or 089?
Where was the oil? Upper chamber or lower chamber?
__________________
My dad always found an excuse why not to buy a Porsche, so I guess I am all out of excuses. |
||
![]() |
|
Registered User
Join Date: Apr 2016
Posts: 15
|
I think it is the 045 (number: 0438140045 on the wur)
There where oil in both chambers. |
||
![]() |
|
Registered
Join Date: Mar 2004
Location: Belgium
Posts: 980
|
It can only come from the vent to atmosphere that is connected to the throttle body.
Never seen it happen before.
__________________
My dad always found an excuse why not to buy a Porsche, so I guess I am all out of excuses. |
||
![]() |
|