![]() |
|
|
|
Registered
|
Shipping p-car seats?
Has anyone done this before and have any do's or dont's to offer up? I still need to find a box for them. These are from an 84 Carrera, do they come apart as in back from bottom to make shipping easier?
Thanks for any help. -Jeff nolift911@hotnmail.com |
||
![]() |
|
Too big to fail
|
I open them all the way flat, put them in a sort of 'missionary' position, tape them together, then wrap a bicycle box around them.
__________________
"You go to the track with the Porsche you have, not the Porsche you wish you had." '03 E46 M3 '57 356A Various VWs |
||
![]() |
|
Platinum Member
Join Date: Jul 2001
Location: Leave the gun. Take the cannoli.
Posts: 20,944
|
Try Greyhound. They will cost a fortune to ship by motorfreight.
__________________
The truth is that while those on the left - particularly the far left - claim to be tolerant and welcoming of diversity, in reality many are quite intolerant of anyone not embracing their radical views. - Charlie Kirk |
||
![]() |
|
Registered
|
Always comes back to sex don't it?
![]() |
||
![]() |
|
Registered
|
Fed Ex ground is really not to bad as long as I can stay out of the oversized category...they are going from VA to OH.
-Jeff nolift911@hotmail.com |
||
![]() |
|
Registered
Join Date: Dec 2001
Location: Texas
Posts: 678
|
I took the back and seat bottoms apart to make the packaging easy and to fit within UPS size guidelines. About a 10 minute job. When I did this it cost less than $50 to ship two seats UPS from DFW to CHI.
|
||
![]() |
|
![]() |
Registered
Join Date: Sep 2003
Location: Colorado Springs
Posts: 1,381
|
I used the seat boxes I received my SPD's in. The box was roughly the size of the seat bottom with the back of the seat forward for the height. Get a box to fit this size and it'll cost around 60-80 anywhere in the US for both UPS ground...
__________________
GruppeB #935 84 Carrera Targa B.A.S.T.A.R.D. (for sale) 82 SC RSR Project (on ebay) 95 Dodge Ram 2500 03 Toyota 4runner |
||
![]() |
|
Driving member
|
I just bought a pair of seats and the the shipper used the ups store. They used boxes that I believe are for chairs. The seat back was just leaned forward a bit and all wrapped in bubble wrap. The seats came in perfect.
__________________
Jerry '86 coupe gone but not forgotten Unlike women, a race car is an inanimate object. Therefore it must, eventually, respond to reason. |
||
![]() |
|
Registered
Join Date: Aug 2003
Location: San Antonio, Texas
Posts: 12
|
Jeff:
I found a cardboard box that held a residential 40-50 gallon water heater worked well (ck any plumbing shop or residetial construction site). Both seats (these were 914 seats that do not hinge @ seat back so your fitment should be easier) will fit with more space than needed, and FedX ground from San Antonio to Reno one way was less than $28.00. Just cut down the excess hight of the box to size. This packing worked well enough that the same box was used for the return after repair. Good riding, Ron Shade |
||
![]() |
|