valve guide replace- machine shop Vancouver BC?
 

The car is a 944 S2- I know this isn't the right thread but I'm looking for a
"Porsche familiar" machine shop to do the job as milling seems to be needed.
Anyone know of one in Vancouver BC Canada? If needed I could go to Seattle Washington but prefer not to. Many Thanks

I would suggest you call Jeff Alton at Turn3 I'm Suurey BC.

I know that one of his lead mechanics also has a 944.

Good luck,
Chris

Try High Performance engines in Burnaby near Willingdon Not too many good machine shops left in Vancouver anymore. If it is just straight forward valve guides and grind , there is also Alec's Machine shop. either Main or Fraser

Thanks, Rick

Jeff Alton rebuilt my 911 motor and was on time and on budget. Great guy to deal with. Quality work, quality guy!
,

I use Hayward Performance (Lance Hayward) in Maple Ridge;
Hayward Performance
I have taken air cooled heads to Lance many times and always get great service.
He is usually quite busy though, so allow some time.
Apparently Weissach, Turn 3, and possibly other shops send their heads there.