|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2009
Posts: 47
|
915 clutch adjustment
I have a 72 915 box and are trying to adjust the clutch. To bring the pedal bite up do I rotate the nuts on the end of the cable tighter or looser?
Sorry for the stupid q!
__________________
*********************************** |
||
04-17-2016, 10:59 AM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,471
|
You tighten the nut but make sure you are not engaging the TOB all the time.
Bruce |
||
|
04-17-2016, 11:02 AM
|
|
|
non-whiner
Join Date: Aug 2012
Location: Slightly right of center
Posts: 5,235
|
Turn them towards the clutch end of the cable, but heed Bruce's caution.
__________________
"Too much is just enough." |
||
|
04-17-2016, 11:24 AM
|
|
|
Registered
Join Date: Jul 2009
Posts: 47
|
Thanks gents.
|
||
|
04-17-2016, 12:55 PM
|
|
|
Registered
Join Date: Dec 2004
Location: Montgomery, AL
Posts: 689
|
I am currently doing this as well with my 72. How do I know if I am engaging the throw-out bearing?
__________________
Steve B. 1972 911t 1999 328is |
||
|
04-11-2017, 09:12 AM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,471
|
You don't want the pedal to engage too close to the floor or too high
Engagement starts about 1/3 way off floor and is complete by 2/3 of the way to the top. Bruce |
||
|
04-11-2017, 03:39 PM
|
|
|
