Pelican Parts Forums - CIS to Webber's swap

Pelican Parts Forums (http://forums.pelicanparts.com/)

- Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)

- - CIS to Webber's swap (http://forums.pelicanparts.com/porsche-911-technical-forum/972919-cis-webbers-swap.html)

Quote:

Originally Posted by unclebilly (Post 9773051)

Cool- which pump is it?

Quote:

Originally Posted by unclebilly (Post 9773051)

I've done this twice now.

Get a VW fuel pump, there is a Bosch Motorsports variant that puts out 3-4 lbs which is what you need for your Webers. It is a direct replacement for the factory pump and looks identical. We took this approach on the chump car.

On my other race car, I have the Carter pump which is a POS. It puts out 5 psi so I have to regulate it down to 3.5-4. I used a needle valve and a gauge to set this, the needle valve in on a bypass between the supply line and the return line. Race gas requires that I tweet the valve whereas pump gas needs the valve opened up a 1/4 turn to maintain the correct pressure.

Do you have a part number for this pump? Or where it can be purchased?
Thanks

For anyone that is interested I use a ebay spectra 3 to 5 psi electric pump for around $30 for my weber carbs on fleabay and it fits in the same location as the cis pump up front under the panel.

Quote:

Originally Posted by rbogh901 (Post 9773082)

Cool- which pump is it?

Yeah, which one is it?