|
|
|
|
| Author |
|
|
grateful user
|
Found myself a cream puff in Memphis.
Sitting all sad in a shop on Jackson Ave. with a bad fuel pump. Two owner, fairly well taken care of 77 coupe. Super clean and straight. NO rust, never in an accident. Back in the 90's he had a C2 kit put on it and a very crappy paint job that will scrape right off to reveal a do do brown. 81 or 82 SC engine that is strong and tight. Trans shifts like my toyota. Breaking it down for a real re respray and interior freshening. Could use some dark brown door pockets if anyone has them laying around from a colour change.
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do. |
||
10-01-2017, 03:30 PM
|
|
|
grateful user
|
 
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do. |
||
|
10-01-2017, 03:38 PM
|
|
|
grateful user
|
  
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do. |
||
|
10-01-2017, 03:43 PM
|
|
|
Registered
Join Date: Jan 2007
Location: Western Mass
Posts: 420
|
They went to the trouble of a C2 body kit but kept the sugarscoops?
__________________
1986 Carrera coupe - black on black 1972 CB500/4 |
||
|
10-01-2017, 05:00 PM
|
|
|
Registered Minimalist
|
^ and what looks like an early whale tail. Hmm. Looks like SC flares added too.
__________________
Duane / IG: @duanewik / Youtube Channel: Wik's Garage Check out my 75 and 77 911S build threads |
||
|
10-01-2017, 06:28 PM
|
|
|
grateful user
|
All that stuff is coming off. Scraping the Earl Shiebe paint job off, pretty easy, didnt stick very well. SC flares will stay, the chrome is mint, porsche spoiler is for sale. Replacing all weather striping with oem, Not going back brown. Will be for sale soon to finance the 70E project.
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do. Last edited by don gilbert; 10-05-2017 at 10:18 AM.. |
||
|
10-01-2017, 06:51 PM
|
|
|
|
grateful user
|
 
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do. |
||
|
10-04-2017, 04:12 PM
|
|
|
grateful user
|
  I was getting ready to pull the engine and trans and started scraping and couldn't stop.
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do. |
||
|
10-04-2017, 04:19 PM
|
|
|
grateful user
|
   Found some garage time. Engine out, getting closer to paint. Word of advice, clean your sunroof drain holes regularly. Only rust on the whole car.
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do. |
||
|
10-18-2017, 02:13 PM
|
|
|
grateful user
|
   Let the body work begin. Pretty clean car.
__________________
fully disassembled, blasted, customized and restored 75 targa with factory hard top, 993 style turbo ft fenders, steel flares, C2 bumpers and rockers, 82 3.0 sc 9.5/1 engine with PMS flywheel, 964 cams, flowed heads, ssi's short geared 915 w/lsd, polybronze, bilstein,working lambda, modified and highly tuned cis, tensioners, pop valve, backdated exhaust and heater, 2300 lbs. no bolt left untouched. 1970 911E. Nice car but needs a re-do. |
||
|
11-06-2017, 11:08 AM
|
|
75 Porsche 911
bike
1970 porsche E
1975 Porsche 911s
