|
|
|
|
| Author |
|
|
Registered
|
Help with hard oil line.
Can anyone help me out? I am replacing the hard oil line from the engine to the line that goes to the thermostat. I removed the hard line, more to the point detroyed it during removal. The line I ordered does not match for a 79sc euro, it is about an inch to short to meet up with the thermostat line. Pelican did some checking for me and the euro line is apparently different with the part number ending in 17 and not 11 or 16. Anyway this euro line is NLA and my old one is destoyed. I was able to get the new/wrong line threaded on both ends but could not get the compression side that goes into the engine to seat all the way, line is just not the right fit. Any ideas on what I could do or where I could get a proper replacement would be appreciated.
Thanks Kevin
__________________
Kevin 79sc - Timing is everything. |
||
02-20-2003, 10:13 AM
|
|
|
Registered
Join Date: May 2001
Location: Anchorage, Alaska, USA
Posts: 857
|
Kevin, try Classic Tube
address: Classic Tube 80 Rotech Drive Lancaster NY 14086
__________________
"The greatness of a nation and its moral progress, can be judged by the way its animals are treated." M. Gandhi 1977 911S...sold; 03 F20C; 2009 VW Jetta Sportwagen |
||
|
02-20-2003, 11:16 AM
|
|
|
Registered
Join Date: May 2001
Location: Anchorage, Alaska, USA
Posts: 857
|
Kevin, I'll try again. Seems PP wouldn't allow the url I posted with the address. classictube@aol.com.
__________________
"The greatness of a nation and its moral progress, can be judged by the way its animals are treated." M. Gandhi 1977 911S...sold; 03 F20C; 2009 VW Jetta Sportwagen |
||
|
02-20-2003, 11:18 AM
|
|
