|
|
|
|
| Author |
|
|
Slippery Slope Expert
|
Parts ID Help Please
I need help identifying some items from a Wrightwood gasket set for the SC, plus some bolts/spacers that turned up on my bench.
 The six fat O-rings are 16X6X5mm The six skinny O-rings are 20X14X3 The eight inhex bolts are 8X20 The eight spacers are 17X8.5X8 The roughly rectangular gasket I assume is fuel system related, and I think the O-rings are too; I don't remember seeing anything like these when I disassembled the engine. The inhex bolts and spacers were packed in two packages of four. (They may not be Porsche-related; they may have migrated onto the bench from someplace else.)
__________________
“As new technologies become indistinguishable from magic, and I can no longer tinker, the magic goes away for me.” |
||
03-26-2018, 03:27 PM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,523
|
Large gasket goes between top and bottom of the atrflow sensor
Small heavy o rings on the injectors. The larger, thinner o rings go under the insert that the Injector snaps into. the bolts go on the perimeter of the airflow sensor? Possible The spacers replace the springs? Possible Bruce |
||
|
03-26-2018, 04:01 PM
|
|
