Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Used Parts For Sale & Wanted (http://forums.pelicanparts.com/porsche-911-used-parts-sale-wanted/)
-   -   M&K R style 2 in, 2 out (http://forums.pelicanparts.com/porsche-911-used-parts-sale-wanted/1059481-m-k-r-style-2-2-out.html)

mepstein 04-28-2020 02:30 PM

Sold - M&K R style 2 in, 2 out
 
Sold - M&K R style 2 in, 2 out stainless steel exhaust. Very light, pretty loud, amazing sport sound. Purchased new and used on a car for less than 10 miles before the car was sold. $695 + ship. Email Mark@MarkEpstein.net to purchase.

http://forums.pelicanparts.com/uploa...1588109218.jpg

Stophos 04-28-2020 08:20 PM

Mark,
Interested dependent on the measurement center to center of those tips. Let me know wen you can.
Thanks - Chris

RarlyL8 04-29-2020 01:20 PM

R muffler tailpipe spacing is 31" on center. Typical fiberglass RSR bumper cut-outs are 30"-32" on center.

Stophos 04-29-2020 03:07 PM

Muffler outlets
 
Quote:

Originally Posted by RarlyL8 (Post 10845211)
R muffler tailpipe spacing is 31" on center. Typical fiberglass RSR bumper cut-outs are 30"-32" on center.

So to confirm then this would be off centered if installed on a car with a typical RSR bumper?

mepstein 04-29-2020 06:13 PM

Sorry, I didn't see this post until now. I'll be back home in a day or two and I'm happy to get it measured up.
I don't think Brian was implying these would be off center. I think he meant that RSR bumper cutouts vary by about two inches so there is no guarantee that the tailpipe will fit your bumper. At least that's what I read into it.

Stophos 04-29-2020 06:26 PM

Quote:

Originally Posted by mepstein (Post 10845553)
Sorry, I didn't see this post until now. I'll be back home in a day or two and I'm happy to get it measured up.
I don't think Brian was implying these would be off center. I think he meant that RSR bumper cutouts vary by about two inches so there is no guarantee that the tailpipe will fit your bumper. At least that's what I read into it.

Okay understood. I will also have the center measurements of the bomber cuts tomorrow.
Thanks

RarlyL8 04-30-2020 05:38 AM

Quote:

I think he meant that RSR bumper cutouts vary by about two inches so there is no guarantee that the tailpipe will fit your bumper.
Correct. Fiberglass valance cutouts can vary, muffler tailpipe spacing does not vary.

Stophos 04-30-2020 07:02 AM

Well I was way off. My IROC RSR bumper cutouts are 16.5 on center. :(

dg567 04-30-2020 07:03 AM

Mark, Are the tips removable?

NickP 04-30-2020 10:34 AM

I'm using an M&K R muffer from Brian on my ST. It's 31" on center between the pipes and a perfect fit on my Getty suppied fiberglass bumper. Sounds awesome, pretty loud and no drone.http://forums.pelicanparts.com/uploa...1588267993.JPG

mepstein 04-30-2020 12:00 PM

Quote:

Originally Posted by dg567 (Post 10846006)
Mark, Are the tips removable?

No

David 23 04-30-2020 04:07 PM

Do you have any sense of how it sounds compared to a standard 2/2 M&K or Dansk 2/2 sport muffler? Always wondered about this particular model of M&K.

mepstein 05-01-2020 06:58 AM

Quote:

Originally Posted by David 23 (Post 10846785)
Do you have any sense of how it sounds compared to a standard 2/2 M&K or Dansk 2/2 sport muffler? Always wondered about this particular model of M&K.

Sounds great but louder than a standard M&K. That's sort of the point.

rgofast 05-01-2020 10:10 AM

M&K makes baffles that insert into the trial pipes for tuning purposes. I’m running the baffles on mine with a 2.7

Geneman 05-01-2020 12:47 PM

Rgo. with the baffles, any idea what sound level is at 50ft?. I like that setup if it reasonably close to 90dB.

rgofast 05-01-2020 04:15 PM

Sorry, I wasn’t concerned with the sound, was just using them to set back pressure. I do drive it on the street. Mine sounds like a Ferrari at high RPM, and is fairly quiet at 3000.

mepstein 05-02-2020 05:22 AM

Muffler is sold.


All times are GMT -8. The time now is 10:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2020 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.