Try not, Do or Do not
Join Date: Apr 2004
Location: Fallbrook, Ca. 92028
For sale: 2.7 RS engine kit
2.7 RS conversion kit. This kit consists of very low mileage matched set of 2.7 RS pistons and cylinders. The cylinders were measured for ovality and taper then deglazed.
The pistons were cleaned, Zygloed for cracks and measured for wear. New Goetze rings were gapped and installed.
The heads are exceptionally nice 73 2.4 “S” heads. ( casting date 9/72)They have never been fly cut and ported from the factory at 36mm in and 35mm out. They were cleaned, inspected and rebuilt using new valve guides (manganese/ bronze), new valves and valve springs. The spring height was set for factory “S” cams. During the rebuild process the heads were chamfered for 2.7 / 90mm cylinders.
The last parts included in this kit are the factory MFI 911”S” cams. They were cleaned, inspected and polished. Then a coat of Dow 321 dry film lubricant was applied to protect the cams and rockers during start up.
This package is all you need to turn a 2.4(T,E,S) or a 2.7 CIS engine into the very desirable 2.7 RS spec engine.
This package carries with it the Supertec guarantee. If you’re not happy for any reason simply return them for a full refund (less shipping) with in 7 days.
The parts are offered as a package but I will consider separating them for the right offer.
$ 3,200 takes it all
Call or email questions to Henry 760-728-3062 firstname.lastname@example.org.
We have a plethora of used Porsche pistons and cylinders in stock. Email us with your specific needs and we’ll try to list them for you.
Last edited by Henry Schmidt; 04-22-2009 at 08:38 AM..
|04-22-2009, 07:49 AM||
Join Date: May 2006
Location: upper north & lower south
Henry, am interested, being S heads I suppose they have the MFI holes, if so how much shipped to 07036?
PM or email please, I may be looking for a built short block.
"old cars and bikes"
== System architect & developer
|04-22-2009, 08:41 AM||