![]() |
|
|
|
Registered
Join Date: Nov 2000
Location: Hamilton, Ohio, USA
Posts: 1
|
zinc coating
How can I know that my 1976 912E was zinc coated from the factory as I have heard that some were and some were not?
|
||
![]() |
|
Registered
Join Date: Mar 2000
Location: UK
Posts: 2
|
I'm thinking of buying a 912E,and would like to know if you can tell if a car has been zinc coated. Is it possible to check by chassis number?.Living in the UK with all the salt that gets put on the roads in winter a non galvanised car would soon rust! I also read that the roof pannel on some early coup galvanised cars was not treated(the Poorsche book a definitive illustrated history), is this the case? any advice welcome.
------------------ |
||
![]() |
|
Registered
Join Date: Mar 2000
Location: UK
Posts: 2
|
I'm thinking of buying a 912E,and would like to know if you can tell if a car has been zinc coated. Is it possible to check by chassis number?.Living in the UK with all the salt that gets put on the roads in winter a non galvanised car would soon rust! I also read that the roof pannel on some early coup galvanised cars was not treated(the Poorsche book a definitive illustrated history), is this the case? any advice welcome.
------------------ |
||
![]() |
|
Banned
|
Thick twice about buying a 912e in england the Your Classics editor thougth he was buying a good car.He replaced nearly the whole car. If you want a Try at get one from SoCal. or AZ.Steve steve@914underground.com see my site www.914underground.com
h |
||
![]() |
|
Banned
|
Thick twice about buying a 912e in england the Your Classics editor thougth he was buying a good car.He replaced nearly the whole car. If you want a Try at get one from SoCal. or AZ.Steve steve@914underground.com see my site www.914underground.com
h |
||
![]() |
|