|
|
|
|
| Author |
|
|
Registered
Join Date: Jan 2006
Location: Millersville, MD
Posts: 505
|
Fan Belt Replacement
I recently purchased a 67' 912 targa. The fan belt broke and i need to replace it. What is the correct tool to use, i think it is missing in my tool kit. Thanks for your assistance.
Brian
__________________
*NEW 1969 911t targa soft window option 1967 912 Targa Soft Window 1989 911 GP White Cabriolet 1970 911t 2001 Chevy Silverado 1500 1997 Audi A4 Quattro 2.8 2003 Acura TL Type S 1973 911t 3.0 track car (SOLD) |
||
11-27-2006, 09:40 AM
|
|
|
Registered
|
looks like no one has replied..
it';s easy easy easy have a look on ebay there are some generator spanners going for about $30 have a word with these guys ( pelican ) as they seam to be making them again.. in black oringal ones are chrome.. you can use a big shifter.. put a flat bladed screw driver in the top pully slot ( you will see this as a notch ) this shoudl then hold the top pully in place.. Then un do the huge nut and you can take the half of the pully off and then get to the belt.. 15mins job.. BUT how you set it is the key.. you want about 3/4" play in the long part fo the belt and to do this it's done by adding or removing shimms
__________________
Too many cars too little time.. |
||
|
12-17-2006, 09:29 AM
|
|
|
Registered
Join Date: Mar 2001
Location: Falls church Va
Posts: 725
|
A little to add. Keep all the shims on the gen shaft. Any shims that you remove from in between the pully halves you need to put on the outer pully before you put the 36mm nut back on.
|
||
|
12-20-2006, 12:26 AM
|
|
1969 Porsche 912 1600 
