|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2002
Location: Cedar Rapids, Iowa
Posts: 48
|
Oil Cooler Installation
Is there a torque spec somewhere for the three nuts that hold the oil cooler to the crankcase? I removed the oil cooler to chase down a leak on my late 67 (with the later style oil cooler). The cooler passed a pressure test, there are no visible cracks in that vicinity of the crankcase, and the gaskets didn't look distorted or cracked. What about using gasket sealer on new gaskets when I re-install the cooler?
|
||
11-09-2002, 11:10 AM
|
|
