|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2001
Location: Arlington Heights, IL, USA
Posts: 637
|
Distributor clamp
While testing the fit of my new distributor cap before unplugging any wires on the old cap I noticed that the distributor moved (rotated) slightly. I reset the timing and tightened the distributor clamp as tight as I could but I don't think I trust it. The clamp is a flimsy stamped part . I would like to replace the clamp with a stronger one but can't locate one for an 050 that is any better than the one I have.
The only fix I can think of would be to remove some metal between the clamp ears so the bolt can compress it more and tighter. Any suggestions?? Thanks, Ron
__________________
RonD 69912T |
||
11-13-2002, 05:20 AM
|
|
|
Registered
Join Date: Nov 2001
Location: arlington,va USA
Posts: 180
|
Hey Ron
Just remove some metal. No cost, just time GoodLuck |
||
|
11-13-2002, 05:24 AM
|
|
