|
|
|
|
| Author |
|
|
Registered
Join Date: Jan 2004
Location: Winchester, Ca.
Posts: 29
|
What Tensioners Do I Have?
Need some help here. This is an original 914-6 motor which has been rebuilt and fresh. I understand there are stock tensioners and heavy duty tensioners. I am looking to install blocks on these tensioners and calling it good rather than going the pressure fed ones. Wondering which tensioners they installed here. The part number on the passenger side is 801.105.518.02. The part number on the drivers side is 901.705.519.00, Very hard to read so this may be wrong. Tensioners do look different though. I am going to try to include pictures here but I don't know if it will work. Thanks for any help and advice.
A:\MA:\MVA:\MVC-434F.JPGC-435F.JPGVC-436F.JPG
__________________
Klink '73 914 1.7 (Six Conv. project) |
||
05-01-2004, 06:00 PM
|
|
|
Registered
Join Date: Jan 2004
Location: Winchester, Ca.
Posts: 29
|
Pics
__________________
Klink '73 914 1.7 (Six Conv. project) |
||
|
05-01-2004, 06:10 PM
|
|
