|
|
|
|
| Author |
|
|
Registered User
Join Date: Aug 2010
Posts: 1
|
How to reset e-brake dash light
I am rebuilding the rear calipers on a 1975 Porsche 914 1.8. Just wondering if anyone has an experience on how to reset the e-brake dash light after the rebuilding is complete? Car has been in storage for 1 year. Calipers are seized up and the light keeps blinking. Any suggestions?
Thank you. |
||
08-30-2010, 06:40 AM
|
|
|
Registered
Join Date: Jul 2010
Posts: 7
|
E Brake..
There is a small switch on the Master cylinder that you can reset...I have the same problem and could not find it but i did check the small switch at the base of the E brake when you punch that in it should go off...mine did for a while and then it started blinking again so I am still looking for the supposed reset switch...
|
||
|
08-30-2010, 07:10 AM
|
|
|
Registered
Join Date: Nov 2004
Location: Vancouver, BC
Posts: 60
|
If there isn't a button on the M/C (mine doesn't have one), then remove the switch with a wrench and screw it back in.
|
||
|
08-30-2010, 12:19 PM
|
|
