|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2002
Location: Columbia, MO
Posts: 148
|
Mocal oil cooler problems
Having a little problem with my mocal...
I'm getting some leaking very small drops) from around were the AN fitting screws onto the oil cooler. The side of the braided cable that I put together is not leaking at all but the other end, the blue end is leaking on both nipples of the mocal. I tightened them up pretty well, but the male end of the mocal looks like alum and I didn't want to crank it on to much more for fear of cracking it. Anybody had similar incident or any sugestions for me. Thught about coating the threads with a sealant but not sure if that's kosher. 
__________________
When I had my boat I used to throw 50 dollar bill at it when ever I went to the dock...now I do it when ever I open the garage door. |
||
12-20-2002, 12:40 PM
|
|
|
Registered
Join Date: Feb 2001
Location: idaho springs, co
Posts: 132
|
I had the same issue with an Earl's cooler, plumbers tape made it go away in about 10 minutes.
If no more leaking is kosher, then this is kosher. |
||
|
12-20-2002, 01:44 PM
|
|
