Euromeister Wheels - Out Of Stock For a Short Time

[Dmitry at Pelican Parts]

Euromeister proudly presents these Alloy Replica 5-spoke style wheels. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern.

Euromeister Wheels utilize original factory offsets to fit 1965-89 911, 930 with Carrera or Turbo flares, 1983-86 944 except Turbo and 914-6 with GT Flares.

Wheels accept the original 70mm ring clip cap standard on most Porsche vehicles. Center caps and lug nuts sold separate.

Below are the sizes back in stock:

- 16x7 (23.3 offset)

- 16x8 (10.6 offset) Semi-Gloss Black w/ Machined Lip

- 16x9 (15.0 offset)

- 17x7 (ET 23.3 offset)

- 17x8 (ET 10.6 offset)

- 17x9 (ET 15.0 offset)



Currently Out Of Stock - will update when back.

[RyanWay]

Which offset would I need to do 16x9 rear on a 84 carrera? I'm slightly confused since the stock offset is 23.3 Thanks!

[Dmitry at Pelican Parts]

Originally Posted by RyanWay

Which offset would I need to do 16x9 rear on a 84 carrera? I'm slightly confused since the stock offset is 23.3 Thanks!

Hi Ryan - I spoke to a colleague of mine and he mentioned that the stock offset should work for the 16x9 in the rear. Please let us know if you have any other questions!

[v2rocket_aka944]

Would you please check the actual weight of the various sizes of these wheels? A lot of wildly varying figures have been thrown about, including Pelican's posted shipping weights.

Specifically I am most interested in the 16x7 ET23 and 17x7 ET23 wheels.

[Dmitry at Pelican Parts]

I checked with the warehouse about this. The posted weight of the product on site is of the actual product, not packaged.

16x7 = 22lbs

17x7 = 24lbs

Originally Posted by v2rocket_aka944

Would you please check the actual weight of the various sizes of these wheels? A lot of wildly varying figures have been thrown about, including Pelican's posted shipping weights.

Specifically I am most interested in the 16x7 ET23 and 17x7 ET23 wheels.

[djnolan]

Dimitry,

Is there any way to get that look in a late offset et52/65 16" setup?

[v2rocket_aka944]

thank you.
at those numbers, you sure they aren't made of steel?

[Dmitry at Pelican Parts]

Originally Posted by djnolan

Dimitry,

Is there any way to get that look in a late offset et52/65 16" setup?

My apologies, I must have overlooked this comment. What look are you inquiring about?

[trader220]

Pelican no longer sells these?

[Dmitry at Pelican Parts]

Originally Posted by trader220

Pelican no longer sells these?

Correct - the vendor who we used to get them from is no longer in business. We're currently working on a replacement to stock them again.

[azbanks]

Does anyone sell them anywhere? I can find any websites that carry them any more in any country.

[trader220]

Apparently not. Now I may sell the 7 and 9 by 17s I have.

[EuroZ06]

Any update?

Any comparable wheels?

[Dmitry at Pelican Parts]

Originally Posted by EuroZ06

Any update?

Any comparable wheels?

Unfortunately no update yet, but I know that the team is getting close on a supplier or some sort of comparable wheel. We currently have a 10% special on Braid wheels that ends today - they're not cheap but definitely quality wheels - I'm attaching the link below.

https://www.pelicanparts.com/promos/1Braid6282019/

[BullStandsAlone]

Hi Dmitry - Just wondering if you've heard more rumblings or an update on stock. Looking for 16x8's.

[Dmitry at Pelican Parts]

Originally Posted by BullStandsAlone

Hi Dmitry - Just wondering if you've heard more rumblings or an update on stock. Looking for 16x8's.

Just checked with our Catalog team and unfortunately we don't have an update yet. I know that they're working on a solution but apparently it's taking longer than expected. I'll make sure to give everyone in this thread an update as soon as I hear anything.

Thanks for your patience guys, much appreciated!