Steering rack install question

[universeman]

Hey guys,
Has anyone had an issue installing a steering rack in which the pressure line with its turns and twists, runs right into where the crossmember wants to be? I started tightening my rebuilt rack, but it stopped b/c the hard part of the line was going to be crushed against the crossmember. Thoughts?

Pictures and a video here: https://www.icloud.com/sharedalbum/#B0SJr1PPdJRob15
(In the video, I said "rack" where I meant "crossmember")

Thanks in advance!

[Stoneguy]

I did mine last year. My hard line is connected to the back port .The one you have red cap on.
That moves the line back and the bends line up better.
Hope this helps.

[Stoneguy]

[universeman]

Thanks, Stoneguy!