![]() |
|
|
|
Registered
|
![]()
I have a DE this weekend but the 17s were hitting the outer lip, so after looking, thinking, more thinking, I came up with this idea.
First, I got a small 1/4 inch board, a shop rag, 2 clamps and a pair of Vise Grips. After clamping the board, with the cloth between the fender & board, then starting in the center, clamped the Vise Grips, and went out, re-clamping side by side until I covered the area needed rolling, then I tightened the Vise Grips and repeated the entire process until the lib was flush. And after removing the clamps, the paint had no new damage. ![]() ![]()
__________________
Byron ![]() 20+ year PCA member ![]() Many Cool Porsches, Projects& Parts, Vintage BMX bikes too |
||
![]() |
|
Registered
Join Date: Oct 2005
Location: CT
Posts: 406
|
Good idea!
![]()
__________________
02 996TT Stick Modded AKA Tubsey 08 Cayman S 6spd 49k Black/Terra-cotta 04 Gallardo Gated 6spd 19k Arctic Grigo/Nero Blue 14 BMW M5 6spd Stick 06 Cayenne S 🌝 miles 1982 928 S 5spd :-) |
||
![]() |
|
Registered
Join Date: Aug 2000
Location: Calgary, Alberta, Canada
Posts: 523
|
Great alternative to the 'baseball bat" method.
__________________
'86 951 '88 928S4 - the project |
||
![]() |
|