|
|
|
|
| Author |
|
|
Registered User
Join Date: Nov 2010
Posts: 8
|
944 Cab boot
Folks:
Although I have owned several 944s, I just recently acquired a cabriolet. The top needs replacement and the boot is missing. I purchased a boot from a Porsche used parts dealer. But, I am confused over the fit. The three snaps on the boot do not line up with the three snaps on each side of the top. Attached is a pic of the snaps on the car. Do they look correct to anyone? I am thinking that I got a top from the wrong model Porsche. Thanks 
|
||
11-10-2010, 12:58 PM
|
|
|
Registered User
Join Date: Oct 2010
Location: Britghton(UK)
Posts: 27
|
I'll try to have a look tomorrow AM.
__________________
If everything seems under control, you're just not going fast enough. |
||
|
11-11-2010, 11:15 AM
|
|
|
Registered
Join Date: Apr 2007
Location: Napa Valley, CA
Posts: 374
|
The three pins in the picture are correct. The cabriolet conversions were done by hand and in my experience there is a slight variation on each car depending if Hans or Dieter did the work. Also, at the boot flaps above the rear seat area there was a transition from standard button snaps to velcro on the later cars, I think beginning in 1991.
John
__________________
'88 Rothman Turbo Cup '91 951S Cabriolet Clone |
||
|
11-11-2010, 03:40 PM
|
|
|
Registered User
Join Date: Nov 2010
Posts: 8
|
Thanks vette951s. I undoubtedly was sold the wrong boot.
|
||
|
11-14-2010, 06:20 PM
|
|
