Hatch arms to lock setup

[thekidd]

I took my hatch lock apart the other day to get ready to install a used cylinder with a new key on my 84 944. The hatch never worked and was missing the switch and probally a few peices that go near the rear lock cylinder. Got the cylinder and a new seal today, but don't know how to put the rear hatch arms and cylinder back together? Anyone have a picture of the rear hatch lock area? Are there 2 long screws that hold the lock in place? Or does the wire from the motor connect with screws to the cylinder?

[Bob Kontak]

Here are some pics from an 86. May not be the same as your set up.

The plate I am holding in my fingers attaches to the two bolts. You can see one of the mounting holes about an inch from my thumb - to the right.

Let me know if you need a better pic of the cylinder.

The motor is a foot away towards the passenger rear tire.