Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 924/944/968 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered User
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 44
993 Wheel off sets / Spacer Calc ??

Hi,

My local Porsche guys, tell me that there is a formulae for calculating the required spacer sizes based on the offset of
the wheels etc.. ( they did not give me the formulae... )

Apparently, there is a number on the back of the wheels (
genuine ) ET xxx... which is used a part of the calc..

Currently my Car 944S2 has 15mm spacers on the back and to get the 993 wheels on but need to get the geniune Porsche spacers for local vechile compliance reasons... The porsche ones
are alot winder hence I want to check...

Any one done this before... or got the formula... Last time I did
this it was trial and error... but the part I need has to come from
Germany and costs $$$$$$ and 3 weeks to arrive, so need to get it right..

Thanks in advance..

Simon
Old 02-23-2002, 10:50 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply

Thread Tools
Rate This Thread
Rate This Thread:

 


All times are GMT -8. The time now is 03:27 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.