|
|
|
|
| Author |
|
|
Registered
Join Date: Sep 2011
Location: Florida
Posts: 1,949
|
FS: 10.6 Euro Pistons (SOLD)
I have a spare set of 10.6cr Euro pistons that will fit any 2.5. They are all tolerance group 1 and measure within tolerance at the tops, bottoms and in two planes. The ring gaps are to spec. The rings were removed and discarded when the pistons were cleaned, the pins were put back in the same piston after cleaning. They will take stock factory rings. There is minute wear to the coating on the skirts and tiny scratches not able to catch a nail. There is no damage from valve contact or contamination, some usual discoloration to the tops.
These would be suitable for anyone currently doing an engine build or who is planning one in the near future. Asking $600 obo shipped in the CONUS  
__________________
Mike A 9TECHNIK | TRANSAXLE ÄRA 1986 944 (Street); 1986 944 (Track); 1986 951; 1989 951 (3.0L 8V); 2000 996 Cab. Last edited by 9FF; 02-16-2012 at 09:36 AM.. |
||
02-15-2012, 10:22 AM
|
|
