|
|
|
|
|
|
Registered
|
Hi:
Please help me with this: I have an 84 944 with brown leather steering wheels 3 arms. I need to know what other Porsche´s steering wheel fits on my car ? The 914 steering wheels fits on my car? If yes what model year of 911 fits on my 84 944 ? And the most important, the 85.5 944 and later models fit on my 84 ? The 924s and 94´4 turbo steering wheels fits on my car ? My steering wheel is on poor condition, and I really like a lot the 4 arms 911, 944 steering wheel, but I don´t know if this model exist in brown color ?, I atach a photo of this 4 arms wheel. Thanks and regards Eduardo |
||
|
|
|
|
Registered
|
Eduardo,
Yes that 4 spoke wheel will fit. You may have problems with your turn signals cancelling correctly (as I did when I swapped my 3 spoke for a 4). Good luck. |
||
|
|
|
|
Registered
|
Thanks for your answer.
Would you please tell me the year and the Porsche model of your new steering wheel . That it´s exactly that I wanted. I know that the 928 can´t fits, why ? regards eduardo
__________________
1972 914 914-6 gt look chevy 2.8 v6 (928 engine project) 1974 914 916 Look (3.2 webers engine project ) 1984 944 Auto 550 Spyder (replica) 914 side trans 2.2 type 1 1957 R50 1981 R100RS 2000 K1200RS My Page |
||
|
|
|
|
Registered
|
I swapped my three spoke captains wheel for a four spoke. I switched the backing plates and have had no problem with the turn signal not cancelling out. You can probably find a brown four spoke on eBay or try looking up people who are parting out their 944's. Good luck!
Stephen |
||
|
|
|
|
Registered
|
Stephen:
Thanks, Very useful I still want to know the years ? Regards |
||
|
|
|
|
Registered
|
the one on my car in the picture is from an 85.5 944.
Good luck |
||
|
|
|
|
|
Registered
Join Date: Dec 2001
Location: New Brunswick, Canada
Posts: 408
|
The four spoke wheel came as an option on my 84'.
|
||
|
|
|
|
Registered
|
Thanks to all for your answers.
I already know what steering wheel I need. This is a great forum ! regards OI PUNX Thanks for the picture, I supose that you tool with a digital camera, if yes, Can you please take a picture of the sunroof (cockpit), I want to see the front side (middle( between the sunvisor) If you can, I will apreciate a lot |
||
|
|
|
|
Registered
|
Sorry Eduardo,
I am still in the dark ages as far as photography is concerned. That shot was taken with my Pentax conventional point-and-shoot and scanned in. Good luck |
||
|
|
|
|
Registered
|
my roof is off right now, this is where you mentioned...
|
||
|
|
|
|
Registered
|
OI PUnx: Thanks, I´m too, are better quality photos but we need a digital for this kind of purpose.
Bobs 944: Thanks for your time. No, I want if you can only, a picture of the sunrroof . I want to see what plastics pieces or covers, because I have some holes, and I wan t to see what I missing. |
||
|
|
|
|
Registered
Join Date: Sep 2000
Location: Downingtown, PA
Posts: 138
|
I had a similar problem, but I went with a Dino 4spoke wheel. Needed to buy a Dino hub as well. This wheel is considerably more solid (eliminates lots of vibration) than the original porsche wheel. I wouldn't look at Grant, but Momo and Dino make good products.
__________________
early 85 944 na My water cooled flat six is in my motorcycle... |
||
|
|
|
|
Registered
|
Here's front center of the actual roof. The part I think you're questioning is accessed thru little plugs, 2 hex heads and one phillips is how it's attached on mine. The one pic show the part, sorry it's alittle out of focus, I already put the roof back in the bag when I realized that.
|
||
|
|
|
|
Registered
|
Thanks for your great answer.
Yes, I need this plugs. Regards Eduardo |
||
|
|
|