|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2012
Posts: 108
|
85 944 NA..how to take the bell housing off
what a rough day...
I dropped the transmission a few days ago.. today i took off all the bolts around the bell housing, and the four bolts on the square flange of the torque tube...and I also remove the pin for the clutch fork.... then I moved the torque tube back as far as I could and the bell housing came loose but it wont come off......I noticed that the shaft is still in the bell housing....but i think i have move the torque tube to the back as far as i could (the stop block position) DO i have to take the torque tube off the car....if so how??? GUYS PLEASE HELP ME OUT .........JESUS HELP ME<<<<<<< Last edited by Yuta; 08-03-2012 at 11:25 AM.. |
||
08-03-2012, 11:21 AM
|
|
|
Banned
Join Date: Apr 2011
Posts: 683
|
Remove the speed an reference sensors. See Clark's garage for procedure.
|
||
|
08-03-2012, 11:37 AM
|
|
|
Banned
Join Date: Apr 2011
Posts: 683
|
You also have to rotate the torque tube to get it to the full back position.
|
||
|
08-03-2012, 11:37 AM
|
|
|
Registered
Join Date: Jul 2012
Posts: 108
|
Quote:
|
||
|
08-03-2012, 03:13 PM
|
|
