|
|
|
|
| Author |
|
|
Registered User
Join Date: Oct 2011
Posts: 20
|
Rubbing belt on water pump pulley
Hi folks,
I just put in new belts and water pump on my 87 944t. The problem I ran into is that the belt for the balance shafts is rubbing against the waterpump. Just slightly but it does rub. Any idea how to eliminate this? Picture attached. Thanks, 
|
||
03-28-2013, 04:05 PM
|
|
|
Toofah King Bad
|
Put the belt cover on.
__________________
» 1987 924S Turbo - Got Boost? « "DETERMINATION. Sometimes cars test us to make sure we're worthy. Fix it." - alfadoc |
||
|
03-28-2013, 04:10 PM
|
|
|
Andrew Gawers' Dad
Join Date: Apr 2011
Location: Andrews moms house, CO
Posts: 1,901
|
Quote:
|
||
|
03-28-2013, 04:39 PM
|
|
|
Registered
Join Date: Jun 2006
Posts: 30
|
the balance shaft belt tensioner (the pulley on the eccentric on the bottom passenger side). i believe you should be turning it clockwise to tension the belt. you are probably turning it the other way to tension the belt, which is raising it up towards the pump.
|
||
|
03-28-2013, 09:37 PM
|
|
|
Registered User
Join Date: Oct 2011
Posts: 20
|
Thanks,
Never thought of that. Just assumed that it had only one lobe. |
||
|
03-29-2013, 07:20 AM
|
|
|
Proprietoristicly Refined
Join Date: Jul 2001
Location: ~Carefree Highway~
Posts: 5,833
|
Quote:
J_AZ
__________________
1988 924S, 85,750K ..+ 1987 924S, 154K DD (+15K est. bad odo) |
||
|
03-29-2013, 10:20 AM
|
|
|
Shaggy
Red
Chumpy
Weiße Scheiße
