FS: Stroker Motor Build Parts
 

If anyone is considering building a stroker motor, I have most of the components gathered, and would sell them for my cost:

32v cams profiled for stroked 928 race motor
32v head with 968 valves
1986 block bored and lapped 104mm for 968 pistons
968 pistons with HPC coating
Scat crank, originally from 928 Intl
Oliver rods for 968 pistons and Scat crank
Main Bearings grooved
Rod bearings - clevite
Tri Y Headers Jet Hot Coated
Dry sump pan

$15k

Will consider an SC kit in trade

Deal pending on the following:
TBI intake with air box parts
MoTec M48 (from Sterling setup for 928)