Lots of misc 928 parts from a '84 Euro S FS

[DougM]

Lots of parts to clean out my garage now that my project is nearing completion. I will basically have an asking price of 1/2 of what a 928 used vendor sells the stuff for. Look at the pics and see if there is anything you need. Multiple items will get a better price. Make offer. Some of the stuff here: FOR MORE STUFF, SCROLL TO BOTTOM OF THREAD BECAUSE I HAVE ADDED MORE STUFF AS I FIND IT.
Airbox lid and speaker covers are SOLD
Euro S twin dizzy, caps and rotors
pressure plate, shaft, disc(SOLD)
FUll set of smog pump and lines and pulley(pulley w/bracket SOLD. have second pulley w/out a bracket as pictured)
Marchal H4 headlight(SOLD)
Timing belt tensioner. Needs rebuild kit and also had a few cracked discs when removed
Euro S fuel rails complete
16 hydraulic lifters
PS pump, reservoir, and one of the lines
lower bellhousing cover(SOLD)
misc interior bits like complete glove box, dash undertrays, front and rear visors
pair of tailights(small crack through 1/2 of one of the clear lens(SOLD)
misc front lights and lens(SOLD)
had 2 sets of the front fog/turn signal trim pieces 1(SOLD) 1 remains
complete water bridge
Complete oil filler assembly
Used water pump with under 10k miles on it. Plastic inpeller.(SOLD)
Elevated center armrest
lower timing belt cover and pass side upper belt cover
pair of sill covers. Will need the grommets to attach. Most tabs are intact.
black vacuum line kit from 928sRus. Only needed a few lines and ends. Kit comes plenty of vacuum lines, elbows etc....
set of center caps. looks like they were painted and cleared at some point.(center caps SOLD)
License plate holder(SOLD)
I am forgetting some of the stuff so whatever is pictured
PM me with offers of what you would like. I will marks items off as sold.

[DougM]

more pics

[vintagecarlover]

front spoiler?

[DougM]

No spoiler. Only items pictured.

[Johnny V]

How much for the centercaps and change holder?

[MPDano]

Elevated Arm Rest looks like a cool thing to have.

[DougM]

Pic of the 928s horn pad. Also found 3 sets of brand new rear Jurid brake pads(I think rear)???for 1977-. $20 set
1 set of the brake pads(pending) 2 remain

[MPDano]

Those pads kinda look like they would fit any of the early brake calipers before the "S" Calipers came out.

[MPDano]

How much for the elevated arm pad and signal stalk?

[DougM]

928 Intl has the stalk for $65, so I would say $30 plus ship. Had an offer on the armrest that wasn't enough. It is nice and requires 2 OEM trays to be cut up to work(and they are included so it is ready to go). Top hinge is cut off which this sits on the bottom part and screws down then the bottom is cut out of another to screw the leather top to. Sounds confusing,but it is realy quite simple and looks factory when done. It is leather and nicely stitched. If I cant get $50 for it, I will keep it and try it again when I get my car road worthy.

[davetr]

how much for th water pump ?

[davetr]

and th tail lights

[davetr]

front parking light bezels ??

[MPDano]

Originally Posted by DougM

928 Intl has the stalk for $65, so I would say $30 plus ship. Had an offer on the armrest that wasn't enough. It is nice and requires 2 OEM trays to be cut up to work(and they are included so it is ready to go). Top hinge is cut off which this sits on the bottom part and screws down then the bottom is cut out of another to screw the leather top to. Sounds confusing,but it is realy quite simple and looks factory when done. It is leather and nicely stitched. If I cant get $50 for it, I will keep it and try it again when I get my car road worthy.

Send me Paypal info here or via PM. I will take the Stalk from ya. I think it will fit in one of those Priority Mail Boxes (if it fits, it ships, lol). How is the horn contact on the stalk? Pass on the Armrest, great price, just not a need right now.

Thanks,
Leo

[DougM]

More stuff.
17 pin connector from '84 Euro S. No frayed wires or corrosion. All connectors intact. Only issue is that some of the brown cover has become brittle on the smaller extensions. $175
1 cam gear from the same car. Anodizing has worn off the belt area but it is not U-shaped like many are so worn. $50

Rebuilt alternator that has been used and comes with mounting and adjusting brackets. It is a little oily and dirty, but should clean up nicely. Sold

[MPDano]

Originally Posted by DougM

928 Intl has the stalk for $65, so I would say $30 plus ship. Had an offer on the armrest that wasn't enough. It is nice and requires 2 OEM trays to be cut up to work(and they are included so it is ready to go). Top hinge is cut off which this sits on the bottom part and screws down then the bottom is cut out of another to screw the leather top to. Sounds confusing,but it is realy quite simple and looks factory when done. It is leather and nicely stitched. If I cant get $50 for it, I will keep it and try it again when I get my car road worthy.

Paypal sent for the Signal Stalk!

[Johnny V]

How much for the centercaps and change holder?

[DougM]

Center caps are gone.
Make offer on the change holder. However, if you look at the picture, it is missing the bottom of one of the change holders(the spring and cap). I think its the nickel holder

[DougM]

Updated some pics and added a few more things.

[aturboman]

Hi Doug do you have the Euro rear fog lamp in the rear bumper?

If so please send PM or post photo.

Thanks Robert