Turbo S/1989 Turbo Water hoses

[schmedes1]

Want to replace all the coolant/water hoses on my 1989 951. Have looked at all the usual sources and keep thinking Im missing one or two. Is there a list of the parts for this somewhere?

[rucool]

Hi , my mechanic found most hoses still available and had a Porsche
part No. for them but unfourtantly I cannot find the list.
BUT a few of the parts where ex Germany and stock availibility could
not be confirmed.
I have had most hoses replaced . I belive there is one at the rear of
the engine block and fire wall that about the only chance to replace
it is when the clutch is out.
if I find the list I will let you know.
Russell

[bleu951]

AJ USA has a complete kit with clamps. Paragon and probably Pelican have them as well. This is an area that you can definitely get by with aftermarket parts. There are around 15 hoses in a complete kit. The only thing you need to verify is the hose attached to the back side of the turbo...is it straight or curved? Look down between the heat shield and throttle body with a flashlight to see what you have. The factory updated to a straight fitting with a curved hose with a heat shield. This is an expensive upgrade for what you get.

[schmedes1]

Thanks Keith, I did a lookup of some individual P/Ns on Pelican, but this is what I needed to know.

[APKhaos]

Zims - www.*********** - have a complete kit with clamps for around $150. All genuine parts and the genuine german hose clamps. Never use the crap stainless clamps that have cut-out worm drive slots.