Like it Was When It Left Stuttgart
 

Does anyone have a picture or link that shows the correct orientation/installation of the KLR and DME units inside the passenger foot-well? Of all the ways I've assembled them, none feels or looks right. I only had them out for a week, but cannot remember how they were situated. Thanks... JAXhttp://forums.pelicanparts.com/uploa...1172261115.jpg

there is a metal rail they bolt to. the DME goes towards the middle of the car, the KLR to outside, side by side with the plugs up.

Thanks Nynor... any of the retaining phillips head screws common to both units?

i believe so. its been awhile since i had mine out.

and be careful with that tube that is on the KLR, they can become brittle/fragile.

Here is what it looks like...
Soxhttp://forums.pelicanparts.com/uploa...1172386297.jpg

Thanks for the help soxnail and nynor... all installed and good. Much appreciated - JAX

If you have the factory alarm, it clips onto the metal bracket behind (towards the front of the car) the DME box.

http://gallery.silentmedia.com/d/58675-1/IMG_2025-2.jpg

:)

Here is a pic of my car, stock layout AFAIK.

Louhttp://forums.pelicanparts.com/uploa...1177196278.jpg

Hey now!!!

Stop making me spend money!