94' 964 widebody wheel offset?

rching · 01-31-2006, 09:45 PM

Can anyone tell me the offset on the stock 17" wheels on a factory widebody 94' Carrera 4? There are some 18"speedlines or RH 3.6 turbo wheels I am considering but wanted to check the offset before I bought them. The stock wheels have very little offset on the outside so I know the wheels can't have a big outer lip or they won't fit! Thanks for the info'!

Speedster94 · 02-01-2006, 07:26 AM

7x17 et 55 and 9x17 et 52 , the numbers are beside the valve on the outside .All Turbo wheels will fit as the axles are Turbo .
harald

rching · 02-01-2006, 08:54 AM

Thanks,
learned something new!

78-911SC · 02-07-2006, 06:31 AM

Harald please respond to PM and email.

Cobalt · Cobalt's Garage

Quote:

Originally posted by rching
The stock wheels have very little offset on the outside so I know the wheels can't have a big outer lip or they won't fit! Thanks for the info'!

I know it is a little late but this info might help.

The stock 18" speedlines run an offset of 52 front and 61 rear. They are 8 and 10 inches wide. The higher the offset number the less deep the dish.

rching · 02-15-2006, 08:02 PM

Not too late! Thanks for the info. Still trying to find a set of Speedlines.

yasir · 02-19-2006, 06:00 PM

I know a guy on rennlist who is selling a speedlines set but mind you it ain't going to be cheap,you know it,i know it and the seller knows it too.
If you re still interested then send me a PM with your email address which i will promptly forward to him.
Later

rching · 02-20-2006, 08:57 AM

Yasir,
PM sent