|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2006
Posts: 295
|
964 rear upper shock mounts
does anyone have the exact dimensions of the bolt pattern for the early and late rear shock upper mount?. And also what the exact length differnce is between the early and late rear mounts?
Or a diagram, or pattern? I am trying to get these so I can get a pair of billet adapters made so I can run later year rear shocks on my early '90 C2. thanks. 
|
||
09-29-2008, 07:40 PM
|
|
|
Registered
Join Date: Apr 2006
Posts: 295
|
like these
  
|
||
|
09-29-2008, 07:42 PM
|
|
|
Registered
|
Dan: I'd suggest you talk to Rich Walton at JWE 408-369-9607 . They may have what you need or can fabricate it for you. I'm pretty sure they modified my mounts when they fabricated the parts to allow me to run different diameter springs. If they don't have what you need through Smart Racing, Jerry would probably welcome the excuse to make some.
__________________
Tom SL63 AMG Daily Driver '92 964 now a GT3R/GTL toy for track fun (Tom's Turtle) |
||
|
09-29-2008, 07:54 PM
|
|
|
Registered
Join Date: Apr 2006
Posts: 295
|
thanks Tom.
I am sure Jerry or Rich et al, could fabricate these for me. I already have a very good friend that is a talented machinst that has access to a computerized milling machine and can make these for me if I get him the correct dimensions. Supposedly Jeff Gamroth has made these in the past, so I am going to give him a call to see if he does, or if he can give me the dimensions. That is assuming that I can't get them anywhere else.
|
||
|
09-29-2008, 08:01 PM
|
|
