$129 wire leads! Order now to ensure Monday shipping!
 

Guys I need the rest of the orders before I sit down & make wires all weekend, otherwise they won't ship out monday with the rest of the wires & might be delayed a week or so! Thanks!

Mark

Hi Guys,

To thank all the prior 993/964 traffic, I've decided to organize a group-buy on my very popular ignition wire leads. I've sold hundreds of these, mostly to Rennlisters via word-of-mouth/forum in the last 4 years.

Normally priced at $159 + $8 shipping, If I can compile an order of at least 15 wire sets, I'll reduce my price & eat the difference to set the holiday price to a mere $129 + $7 shipping.

To clarify, I use OEM Beru brass threaded terminals, triple-crimped onto OEM Beru solid-core insulated wire, for all leads including your two coil wires: you simply unscrew your wire ends (all 14) and screw onto your new wires and you're done. Below are pictures of this procedure:
http://forums.pelicanparts.com/uploa...1259865746.jpg
http://forums.pelicanparts.com/uploa...1259865764.jpg
http://forums.pelicanparts.com/uploa...1259865787.jpg
http://forums.pelicanparts.com/uploa...1259865805.jpg
http://forums.pelicanparts.com/uploa...1259865849.jpg
If you're intersted, chime in here and we'll start a count. If not, don't reply to the thread. Once we reach 15, I'll give you paypal instructions & we can proceed.
I can also make wires for '84-89 911's, 930's, 965's, 944/S/Turbo/S2/968, just ask me. Thanks!

PS: I can also offer an "Economy" Red/black set of non-Beru wire, but with Beru ends & still triple-crimped with Beru's tools for a mere $99 + $7 shipping. Still a Great wire, but not OEM Beru. Let me know either way if you're interested.

Mark

Thanks for the great offer! I'll go for an OEM Beru Red set for a 964!

Excellent LouZ, the only thing I ask for now is that people elaborate on whether or not they prefer OEM Beru or the Economy set. :)

i would be in for a set of beru, black

I'd be in for a set of wires for a 993. Plz let me know when you have enough people. Thx

Do you have an economy wire picture? Added cost for USPS to Toronto?

I don't, but it's comparitive in build to a like an MSD wire: average quality. I can take one over the weekend. Toronto: add about $6 :)

I guess I am in. Sigh. More money.

Hi Mark,

Can you give a quote to ship to Perth, Australia? USPS is fine and from experience a lot cheaper than FedEx or UPS. If the shipping cost isn't too outrageous, I'll take a set of Beru in Red for a '90 964. I'm new to this board but have been a long time R'lister also under the same name.

Regards and many thanks,

Neil

Sign me up for an OEM Beru set in black for a 964!

Shipping for a set of Beru to Calgary, Canada?

I'll research Australia tomorow, but with some careful packaging, they'll fit in the small flat-rate USPS box, which is only $4.95 domestic shipping; go to www. Usps.vom & check a quote to Australia; my iPhone is a bit out of juice! :)

Most of Canada should be about $11-12 using the small flat rate box via usps

Thanks Mark, according to USPS the small flat rate international cost to Australia is around $13 so that works for me.

Regards,

Neil

Canada $11-12

Australia $13.

:)

Beru
 

I'm in for a set at 129.00 Quebec Canada

I'm in for an beru red for 993SmileWavy

Cheers,
Emerald

Hey please count me in for a red set for my 964. I am guessing the USPS cost to New Zealand is the same as Australia $13.00?
cheers
Swampy

ps thats the Beru set

Count me in on a Red set of Beru for my 964, state side.