Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > 1- Porsche Technical Forums > Porsche 996/997/991 Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Sponsor
 
Fabspeed Motorsport's Avatar
 
Join Date: May 2014
Location: 155 Commerce Drive | Fort Washington, PA 19034
Posts: 125
The Best Exhaust for a GT3?

What is the best exhaust for a GT3?

There is simply is no BEST Exhaust for a GT3 or for any car for that matter. The question is invalid and therefore the answers are very subjective.

The same subjective question could be "Who is the world’s most beautiful woman? What vineyard produces the world’s best Cabernet? What company manufacturers the best sports car?”
These questions cannot be answered quantitatively and or qualitatively.

Here is the empirical study and results for Porsche GT3 and other cars. I have been a Porsche Club member for over 30 years.


Picture above is from over ten years ago when Fabspeed finished development on the 997 GT3 exhaust Suite

Getting more power and quality sports car sound from OEM GT3s is a matter of design, engineering, incremental dyno development, feedback from customers and setting criteria and goals.

I set the goals and objectives at Fabspeed Motorsport USA with our design and engineering department. I raced PCA and did DE for 20+ years. At Fabspeed, we are immersed in designing and engineering exhaust systems for Exotic cars and making statistically significant no BS gains from the latest Lamborghini Performante to Acura NSX TT to multiple McLaren 720S beasts.

All 997 GT3 to 991.2 GT3 cars come with 6 components that make up the OEM exhaust (8 for the 996 GT3 cars). A set of headers with ceramic catalytic converters, a pair of heavy bulky valved GT3 side mufflers, a GT3 center muffler and a set of bolt-on dual center muffler exhaust tips.

The OEM Porsche AG had to meet specific emissions laws and Swiss noise regulations, so “they” overcompensated and most likely erred with conservative sound with valves and released the car we all cherish.



Picture of Fabspeed’s Porsche 997 GT3 / GT3 RS Center Muffler Bypass Pipe vs. OEM

In December 2006, I designed the Worlds very first GT3 center muffler bypass pipe. It added +5HP over the factory GT3 center muffler. A GT3 center muffler bypass system is the simplest system for these cars. It’s simple to install and now everyone makes these parts in different flavors. Some systems that are out there lose up to -7HP from stock so don’t assume everything is the same. Typically, you break even on power. Fabspeed mini maxflo mufflers added +7hp as well.


Picture of Fabspeed’s Porsche 997 GT3 / GT3 RS Sport Headers

Then, I designed and dyno developed GT3 headers with and without catalytic converters that hooked up to the stock GT3 side mufflers. The HJS German imported 200 cell catalytic converters FLOW 93% of a straight pipe, add power, gutsy sound and do not trigger a CEL.


Picture of Fabspeed’s Porsche 997 GT3 / GT3 RS Race Headers

For race competition, Fabspeed deletes the cats to save even more weight and add some power. Fabspeed Motorsport makes GT3 headers with and without catalytic converters for all models from the 997 GT3 to the very latest 991.2 GT3.


Picture of Fabspeed’s Porsche 991 GT3 / GT3 RS Side Muffler Bypass Pipes w/ Valves

Third, I designed side muffler bypass pipes with and without vacuum valves to save 40 pounds from the GT3 rear engine bay. These work great, an understatement, and save a ton of weight off the rear end of all GT3s. Fabspeed uses the exact OEM GT3 silicon carbide GT3 factory valves versus valves cheaply made overseas or valves that bust after a few heat cycles. Beware, there are very poor-quality products out there. Fabspeed USA is the sole North American importer for Helical UK valves and HJS German sports racing catalytic converters. Beware of counterfeit HJS cats and Chinese exhaust valves.


Picture of Fabspeed’s Porsche 991.2 GT3 / GT3 RS Catback Competition Race X-Pipe

Next, I designed a rear super lightweight catback race exhaust for the GT3 cars. This system eliminates the side mufflers and rear center muffler and has an integral X-pipe to balance both side of the flat six.
All exhaust products mentioned above add significant proven power and are modular to replace individual components on all GT3 cars.


Picture of Fabspeed’s GT3 OEM Center Muffler Reinforcement/ Schalldämpfer Verstärkung

Lastly, I designed a simple GT3 center muffler stiffening and strengthening brace to save GT3 center mufflers. I have been watching GT3 mufflers break apart and blow holes in the center for over 10+ years. This Fabspeed Motorsport USA muffler reinforcement / stiffening brace should be mandatory for all GT3 cars due to their high failure rates. It’s only $295 and you slip it behind the GT3 center muffler and tighten the two straps and you’re finished. You can have peace of mind knowing that for a small investment you have done some vital preventative maintenance—reinforcing and strengthening the Achilles heel of the GT3s. GT3 center mufflers are the weakest part of the exhaust system. I made a Video explaining this on Fabspeed’s website

My advice to any GT3 or car enthusiast looking for sports car sound and power - look for parts that replace individual parts or components. There is no need for a Bespoke system. That way, one can get GT3 headers with HJS German high-flow catalytic converters if they want more power and sports car sound and or if their cars GT3 headers ever fail and the owner gets a p420/p430 code. Fabspeed USA has a gentleman with a 2001 GT3RS that has over 100,000 miles on it and continues to drive it every day. He was on his 2nd set of GT3 factory headers and center mufflers before he came to us. All parts and tracked GT3 parts, and any cars for that matter, TIME out after a while.


Track prepped 996 GT3 using ALL Fabspeed products

For a Street car that is emissions legal and the driver wants maximum power and quality sports car sound that is gutsy and dramatic—the following would be my personal recommendation after being immersed with GT3s for over 15 years starting with the 2004 996 GT3.

Equal length GT3 Headers with the largest HJS German catalytic converters that will fit in the chassis. Fabspeed uses the very largest HJS Cats that will support over 1000 HP. Caveat emptor- I have seen German tuners and others use small 4" round mini HJS cats on 2016 GT3RS cars. Some USA muscle car companies use 4” bullet cats on Hellcats and Vettes making over 600+HP. Bullet cats are puny and will handle only 300-400HP. Despite cost, Fabspeed Motorsport utilizes the largest HJS catalytic converters possible which are 5.35" monster 200 CPSI catalytic converters. Maximum surface area = maximum scrubbing= maximum possible percentage of flow versus a straight pipe. FLOW increases are directly proportional to added sports car sound, more power and long-term emissions compliance.

Next I would get a set of valved GT3 side muffler bypass pipes. These immediately save over 40 lbs. (19 kg) from the rear-end of these cars. I would then reuse my OEM GT3 center muffler and add a GT3 muffler reinforcement and a set of 4" 102mm rear tips to finish off and fill in the center outlet. That’s it, it’s all done, and nothing more can be gained. All while still emissions legal no CEL light - guaranteed!

If I was in California or Miami and wanted to make power, GT3RSR sports car sound, remove over 55 lbs. (27kg) from the rear of my GT3 and have girls/guys hear me coming for blocks and blocks..............a Fabspeed GT3 rear catback race exhaust X pipe with carbon tips is affordable, easy to install and catback emissions legal. It’s simple and works.

When my 991.2 GT3 comes in, I most likely may do a few DEs again and a set of our Burns stainless GT3 321SS long tube headers with merge collectors and Fabspeed side muffler bypass pipes with factory GT3 vacuum valves will be my choice for immediately adding +30HP and saving 40lbs and adding virtual factory RSR dynamic rippin' sports car sound. Check out the complete system below!
Picture of Fabspeed’s Porsche 991.2 GT3 / GT3 RS Long Tube Competition Race Header System

One good thing about all Porsche GT3s are they are so easy to work on compared to cars like McLaren, Ferrari and Lamborghini as the entire rear bumper covers as well as many components must be removed in order to change and or swap out exhaust components. On the Porsche GT3, you simply can swap out GT3 headers without catalytic converters to catted headers in no time.


Fabspeed equipped 991.1 GT3 at our state-of-the-art bustling 26,000 sq-ft facility in Fort Washington, PA

Head to the Fabspeed Website and Youtube Channel for detailed explanation videos on different options along with sound and power levels.
__________________
Paul Aguirre | Exotic Car Performance Specialist
Fabspeed Motorsport
paul@fabspeed.com
www.fabspeed.com
P: (888) 646-4945 x108 |
Old 06-20-2018, 09:48 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply

Thread Tools
Rate This Thread
Rate This Thread:

 


All times are GMT -8. The time now is 04:32 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.