Walter Rohrl wannabe
Join Date: Apr 2010
Location: Miller Motorsports Park
G96-50 current market
Hi I'm Russ, new to the Forums. I've had an '83 SC, '93 C2, and now a '02 C4 cab that I'm building into a turbo street car (most likely only 1-2 track events a year, primarily just a cruiser) with a rebuilt 2001 turbo power plant.
I spoke to Roger at California Motor sports today about my project. He suggested a g96-50 turbo gearbox. My question is, how much is the going rate for these cores or even a box in good condition? He suggested a factory refreshed g96-50 turbo gearbox...at $11k. This is out of my current budget to build on top of this base price.
I spoke to Todd at LA Porsche Dismantlers today as well, he quoted me $5k (box has 29k miles) from a 2003 turbo. Is this pretty standard?
I'm wanting to add an external pump and cooler (I've already got the cooler) eventually, but for now, I'll be running it as is. I'm hoping to purchase this gearbox in the next 30-60 days.
Thanks a lot, Russ
Last edited by Russ993TT; 04-08-2010 at 12:48 AM..
|04-07-2010, 05:41 PM||
Join Date: Jul 2007
Location: S.F. Bay Area
Hi Russ. Sorry I can't be any help with info on the transmission, but I do have a piece of advice for you...........STAY AWAY from Todd at LA Porsche!! He's a rip off guy and you cannot trust him!! I got ripped off by him about 10 years ago and I personally will NEVER use him again!...........even if he had the best price on something! Some say he has changed in the later years, but I'm not going to even try and find out! ...........good luck!
|04-10-2010, 07:11 AM||
Join Date: Nov 2007
Location: Ghetto Garage, CO
I'm gonna stay out of the LAPD discussion.
I would say that $5K for a "good used" 996 TT gearbox is about right. But if you are going to add the pump and cooler later, why not just shop for a GT2 or GT3 gearbox to start with? They will be a couple grand more, but they'll already have that (as long as you stay away from early G96/90 gearboxes). It's just less brain damage and while it will cost you a little more up front it will cost you less in the end.
1986 911 Cream Puff
1974 914 Bumble Bee
1973 914 2.0 Bastard
1999 2.5RS Subaru NA Monster
|04-20-2010, 09:41 AM||
Join Date: Apr 2001
Location: Sun Valley, CA USA
I just noticed this Post, Had I known you needed a GT2 I could have provided one:
Maybe we can still swap it
We had 2 of them! ( need to see if I sold one)
Los Angeles Dismantler for Porsche 911, Boxster & Cayman
Los Angeles Dismantler for Porsche 911, Boxster & Cayman
Thank you very much for the Purchase I assure you there will be no issue or problems.
Your transmission should be in the hands of Roger as we speak.
I have been in constant contact with him waiting to hear updates.
Please let us know if you have any further questions.
As for bxtech
I apologize about the bad experience you had with Todd 10 years ago that was a little bit before my time, but our company has change our ways in the last year dramatically
Read below my previous post:
Hi My name is Efren I'm one of the sales reps here at LA Porsche this is my Point of view from a Sales Rep, I don't Speak for my Boss or the Actual company.
I've been here about 3 ½ years, I'm a huge Posche fanatic on my 2nd Pcar, I'm PCA member: GPX-LA Porsche Region And I love to Track. So I know first hand some of the same problems you guys have with these awesome cars as well as some of the best modifications.
Here I am at a Track event with our Friends at Singer Design and a few of our customers
including Dennis from Down Town Porsche in Los Angeles who purchased and 993 3.6 engine after this event.
http://www.ladismantler.com/index.php?page=item&inv_id=2202 <--- Link
Unfortunately some of these Post of bad quality parts, rude service were made by a few unhappy Sales Reps that are no longer with our company. We are striving to make a difference.
If you have a bad experience We can make it right just ask.
PLEASE NOTE THE DATES! There 3-4 Years old We have since taken all these experiences and grown with them.
We have been under new management, with the help from former
Pelican Parts Manager Trinidad
( no worries Todd & Sara are still here) and have gone through some pretty intense talks and trainings about how to properly help our customers. We aren't perfect but we do always try to help our customer as best as possible.
We offer photos of exact products on request.
Any angle any size BEFORE we charge your credit card.
If you are purchasing an engine/transmission/ Major component We offer 3rd party local shop inspections.
We double check parts with our up to date Porsche Parts Programs (P.E.T. 6) , 1 part number at a time.
Confirmed Leak down test
We offer to Steam clean your engines.
Each item in an Order is Initialed by the warehouse parts pullers before the order is shipped to insure the quality.
These are some of the steps we have taken to provide excellent parts that work and fit.
If you are spending over $10,000 will even fly you in to inspect your parts !
No one offer this!
We have a lot of happy customers as well here is another thread
No to mention Countless Excellence magazine articles
We didn't know any of these customer were featuring there cars on print!
Most have received free parts since there order due to the article.
914 with a 3.6 993 engine ( tech article section)
964 white wide body 993TT engine Robert York (Full article)
986 Silver Boxster with 3.4 conversion Bill Diaz Most recently Last month
The following customers were my customers I personally helped step by step:
Joseph O'Dells 964 Dark gray tiptronic to 6 speed transmission 3 page
Jon's 993 Red Custom Speedster Jager We provided some parts for his conversion and sold him many parts for his previous order.. Including all the plastic panels for the under body that we shipped to the Air force base he was staying at near the Concourse show. He came to our shop countless times to look at specific carbon parts as well as our Turbo S parts.
We helped Oysteins from Norways with his full conversion 993 Vario ram on his 1979 911 SC
Including a brand new Patrick motor sport Short bell housing transmission with LSD.
Boxster Big brake conversion package
We even converted his car to Euro specs at no extra charge
http://www.ladismantler.com/index.php?page=item&inv_id=817 <--- link
right before it left
http://www.ladismantler.com/index.php?page=item&inv_id=1373 <--- link
Oysteins 911 SC came to us as a running 3.0 that he purchases locally sight unseen shipped the car right to us for modifications all the work was done by our local Conversion specialist.
Juan our happy customer in Colombia
996 Carrera C2 to a Full blown 997 GT3RS !!
http://www.ladismantler.com/index.php?page=item&inv_id=1315 <--- link
a lot of back and fourth emails and hours of parts bin searching to make his dream car come true
Singer Design team We have provided countless parts and technical support for these customers.
Singer Vehicle Design
There is a lot of positives with our company. Maybe your car can be our Next Magazine article.
Let me know if you have any questions or concerns good or bad !
Lets move with the future.
(posted originally WTB: Complete 3.6L Engine)
Los Angeles Porsche Dismantler
(818) PORSCHE firstname.lastname@example.org
Last edited by laporsche; 05-14-2010 at 12:46 PM..
|05-14-2010, 12:40 PM||
Join Date: May 2010
I've just visited this forum. Happy to get acquainted with you. Thanks.
Watch Shrek Forever After Online Free
|05-18-2010, 06:36 PM||