![]() |
|
|
|
Registered
|
PCA stock class wheels
I spent a few minutes this weekend reviewing the PCA racing rules. For stock class in section 3D it states you can have wheels 1 inch wider than stock yet everyone seems to be running 9 inch wide rear wheels on SC's that came with 7 inch wide rear wheels from the factory.
What am I missing here? ![]()
__________________
1986 Mazda Rx-Vetten LS1 swap street / track car 2007 MX-5 Roadster, Cinnamon, MC STR champion (sold) 2013 Scion FR-S, MC STX champion (sold) 2002 Roush Stage 2 (traded) 1979 GP White 911SC coupe, aka "Bruce |
||
![]() |
|
Registered
Join Date: Jul 2001
Location: Connecticut
Posts: 1,942
|
There was an option for a brief period during the SC production that equipped the car with 7x8x16 wheels. This allows us to run 8's & 9's. Someone will chime in with the option code/name/edition.
__________________
'83 SC |
||
![]() |
|
Registered
|
PCA rules and wheels
Thanks Chrisp, sounds like a tax law loophole but I will use it.
![]()
__________________
1986 Mazda Rx-Vetten LS1 swap street / track car 2007 MX-5 Roadster, Cinnamon, MC STR champion (sold) 2013 Scion FR-S, MC STX champion (sold) 2002 Roush Stage 2 (traded) 1979 GP White 911SC coupe, aka "Bruce |
||
![]() |
|
Registered
Join Date: Jul 2001
Location: Connecticut
Posts: 1,942
|
Diameter is free. If you can, run 18's, if not, then 17's. There are some fast guys on 16's so don't be discouraged if that's all you have access to.
__________________
'83 SC |
||
![]() |
|
Registered
Join Date: Oct 2007
Location: San Pedro
Posts: 584
|
What are the advantages of 18's and 17's over 16's? Is it the lower sidewall height? Are the 18 & 17 setups heavier than 16's?
__________________
1979 911SC 3.2 SS Custom Backdate Hot Rod 1972 911T, 2.7RS Spec Beck 904 Carrera GTS /3.6 2023. Macan Previously owned several 911 models since 1975. |
||
![]() |
|
Registered
Join Date: Oct 2000
Location: Centennial, CO, USA
Posts: 1,405
|
The Weissach edition of the SC came with 7 & 8s on 15" wheels. This was the model that allowed for 9" wide wheels on stock class PCA club racers now D and E classes. You can only go up 17" height as 16" was the maximum height in model run. HTH
__________________
Bill '72 911T-2.4S MFI Vintage Racer(heart out), '80 911SC Weissach,'95.5 S6 Avant Wunderwagen & 2005 997 C2S new ride. |
||
![]() |
|
![]() |
Registered
Join Date: Apr 2002
Posts: 242
|
Quote:
![]()
__________________
Doug Crossman #92 1992 964 PCA G class #902 1979 911 PCA 911 Cup 96 993 Targa |
||
![]() |
|
Registered
Join Date: Oct 2000
Location: Centennial, CO, USA
Posts: 1,405
|
I just checked the rulebook again, and I stand CORRECTED on the wheel diameter. Sorry for the misinformation.
__________________
Bill '72 911T-2.4S MFI Vintage Racer(heart out), '80 911SC Weissach,'95.5 S6 Avant Wunderwagen & 2005 997 C2S new ride. |
||
![]() |
|