Pelican Parts Forums

Pelican Parts Forums (
-   Porsche Cars For Sale (
-   -   '82 911 SC ROW Rat Rod (

euro911sc 07-22-2016 10:15 PM

'82 911 SC ROW Rat Rod

I am spending a lot more time off shore fishing with my family than I am messin' with 911s. So it is time to let my baby go after 20 good years of ownership and a lot of blood sweat and tears. :(

1982 911 SC ROW Sunroof Coupe

  • 930/10 engine completely rebuilt from the case stud up. 901 Shop in Stuart, FL, did the inspections, reconditioning, and balancing. This is the Euro engine with 204 hp.
  • Heads completely rebuilt/decked 0.010" with all new guides and valves. Bill at Xtreme Cylinder Heads, Palm City, FL, did the head work
  • All 24 head studs replaced with factory steel studs
  • Distributor was completely disassembled, cleaned, lubed, and re-shimmed to 0.005"
  • Engine oil cooler ultrasonically cleaned and tested
  • Thermostat replaced, chains replaced, chain ramps replaced, all new bearings, seals, new Pelican hardware kit used
  • New cam oil lines and cam oil restrictors
  • Carrera oil fed tensioners tested and cleaned
  • Engine shroud was disassembled, fixed/reconditioned, and painted red
  • Aluminum 904 style cylinder air deflection kit from Supertec
  • Magnacore 8.5mm plug wires were installed
  • All sheet metal and engine mounting parts were powder coated and heater block off plates installed
  • A Rennline stainless steel fan strap holds a new alternator and the magnesium fan assembly to the engine
  • CIS vacuum hoses replaced, intake boots replaced, and intake seals replaced
  • Clutch disc in spec, but flywheel replaced
  • Throttle plate bushings replaced
  • New backdate oil lines installed with new S hose
  • 26? row brass turbo oil cooler (Summer track time in South Florida no problems!)
  • Georges european headers
  • M&K GT3 center exit muffler
  • Transmission rebuilt in '01 ~18,000 mi ago
  • Euro gear set
  • All new CVs inner and outer
  • Bilstein HDs front and rear
  • T-bars: 22/29 gun drilled
  • Tarret Adj. roll bars: 22/22
  • Elephant Racing poly bronze front and rear
  • Elephant Racing self centering and frictionless kits in front
  • Elephant Racing weather sealed monoballs rear
  • Re-plated spring plates
  • Elephant Racing Camber Max
  • Rennline monoballs front
  • Rennline 3 point strut tower brace
Wheels & Brakes
  • 964 calipers fitted to the fronts paired with Carrera rears
  • BBS RS 8 and 9 by 16 wheels completely rebuilt and customized in 2011
  • This car needs a COMPLETE REPAINT (scratches, cracks, chips, dings, etc... and one really bad backyard color change It wasn't me!!)
  • Front and rear fiberglass bumpers in the RSR style
  • The tail is a custom piece made in the Porsche factory traditional method. A fiberglass early turbo style top was bonded to a metal OEM deck lid bottom. The deck lid skin was cut off as was the bottom of the tail. The remaining two parts were aligned and bonded together ensuring a perfect factory gap with no tail flex under load.
  • No carpet or rear seats
  • Sparco Pro 2000 race seats
  • Sabelt 5 point 3 camlock harnesses with shoulder pads
  • Brey-Kraus stainless steel harness bar
  • Momo 3 spoke steering wheel mounted to a quick release hub
  • A custom aluminum battery mount
  • Non-Sunroof clip
  • Set of 6&7x16 Fuchs in fair condition

I am asking $34,911 with the roof and Fuchs (my rainy day wheels) to go with the car. PM me and we'll start a nice conversation.

Misc. Notes:
  • I live 2 hours from Miami and can assist with any over seas shipping.
  • More pictures/video to follow.
  • Info on the engine rebuild can be found in the Engine Rebuilders forum by searching under my usr id
  • Items to be fixed prior to delivery: The odometer stopped working again and I have stopped driving the car. It had been rebuilt by North Hollywood Speedometer in the early 2000s once already and I will have to send it out again.
  • There are several good Porsche shops in the Stuart/West Palm Beach areas for PPIs. I can furnish you the #s. You pay up front. If you buy the car I will deduct the cost of your PPI from the total.
  • If you want to see the car in person no problem, but I wont be driving more than 1.5 hours in any direction.
Trades Considered:
  • 26' or bigger Open Center Console w/ twin outboards set up to fish (Regulator, Contender, etc...)
  • Early Boxster S + a lot of $'s

euro911sc 07-22-2016 10:25 PM

MMMnnnn yum Engine parts!

WOW! So clean! Sorry, its not that clean anymore!


Suspension goodness!

euro911sc 07-22-2016 10:38 PM

Post w/ video from the last track night I did in May:

euro911sc 07-27-2016 10:10 AM

I may have found a boat... this introduces some price flexibility... make an offer... worst I can say is 'no'...

euro911sc 07-31-2016 09:03 PM

There is nothing on this car that cannot be returned to stock if you so wish it. I specifically did not make any permanent modifications.

euro911sc 08-08-2016 04:29 PM

a real 930/10 engine...

Checking the crank for runout... all good!

All the beautiful parts!

euro911sc 08-14-2016 08:44 PM

Come and feel the visceral emotions that flow through your body when you are at the wheel of this vehicle. Its not just a drive anymore; its a time machine that takes you back to the days where YOU were the traction control! No more electronic nannies! No more anti-lock brakes! You are the MAN! (or WOMAN!) Its 3 pedals, a wheel, a stick, and 100% fun! You control every bit of this car with your skillful inputs and it will respond instantly. People will see you and say, "My god man! Where ever you have been I want to go there!"

euro911sc 08-18-2016 11:07 AM

May be at PBIR next Tuesday... If you want to see the car in action PM me.

euro911sc 09-08-2016 07:46 AM

Post Labor Day bump!

euro911sc 09-14-2016 11:37 AM

Price drop: $32,911.82

euro911sc 09-16-2016 08:35 PM

week end bumper!

euro911sc 09-26-2016 02:10 PM

Noticed I didn't mention the turbo tie rods...

euro911sc 09-28-2016 10:52 AM

... or the lightweight high torque starter!

euro911sc 10-10-2016 12:11 PM

I made it through Matthew unscathed! so did the car ;)

euro911sc 10-13-2016 03:52 PM

Added a video of the car at idle.

Some inquiries on the trunk area and rust issues. No rust in the trunk area:

Trunk Area

Custom Battery Hold Down

Smugglers Box

euro911sc 10-13-2016 03:56 PM

Rust in the Fuel Filler on the Driver's Fender:

Rear Wing:


PM for more pics of what you want to see. I'll be gone for the next 10 days, but I can grab them when I return.

euro911sc 10-31-2016 10:56 AM


euro911sc 11-09-2016 07:28 AM

Trump Bump

euro911sc 11-12-2016 06:39 PM

Some brake kit images:

Caliper through the wheel... sorry I forgot to rotate the img...

Back side:

Caliper as I unboxed them:

Here is the thread on hat design if ever the buyer goes that way:

I'm currently running Hawk DTC70s. No fade, no brake worries, no hassle... Never made the hats because the stock Carrera rotors work great.

All times are GMT -8. The time now is 02:14 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2020 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.